DIY Star Wars Themed End Table

Hello everyone! Today I’m excited to share my latest creation: a Star Wars Inspired End Table.  This was a really exciting project to work on for three reasons:

1. It’s Star Wars Themed
2. It’s my first project with dado joints
3. It sparkles

Stay tuned for a YouTube video.  I hope to upload it my YouTube channel over the weekend.

In honor of Star Wars day, I have teamed up with a few fellow bloggers to share tutorials on how to make some Star Wars inspired projects.  Please take a moment to check out each project:

• Yoda Wall Art – Hazel and Gold Designs
• Lightsaber Headboard – Mother Daughter Projects
• Wooden Star Wars Sign – Abbotts at Home

Here’s a list of my other Star Wars themed projects:

• How to build a Star Wars TIE Fighter Shelf
• TIE Fighter Shelf (The Force Awakens Edition)
• Star Wars Marquee Wall Art Tutorial
• BB-8 Push Toy
• Darth Vader Necklace
• Crochet Princess Leia Hat

Now, let’s get started!

Disclosure: This post contains affiliate links.  If you purchase an item via one of these links, I’ll receive a small commission at no added cost to you.  This helps keep the content on the site free and I appreciate the support!

Tools and Supplies

The following items are the tools and supplies I gathered to build this Star Wars themed end table.

Tools

• Router
• Homemade Router Dado Jig (tutorial coming soon!)
• 3/4″ Dado Router Bit
• Up Spiral Router Bit
• Router Circle Jig (alternatively can use a jigsaw)
• Jointer
• Planer
• Circular Saw
• Silhouette (for cutting Rebel Symbol stencil)

Supplies

• Sheet of 3/4″ Plywood (1)
• 1″ x 6″ x 8′ (1)
• Wood glue
• Glitter
• Cardstock (for Rebel stencil)
• Red acrylic craft paint
• Paint brush
• Black paint
• Stain
• Sealer
• Mod Podge
• Clear Matte Spray
• Pour-on High Gloss Finish

Cut List

For ease of use, I cut the plywood into manageable chunks.

• 24″ x 48″ (2) – Plywood
• 20″ x 22″ (2) – Plywood
• 1×6 – 21″ (4)

Mill the 1×6 with a jointer and a planer prior to starting step 1.  For details on that process, check out my blog post on How to Make a Wooden Cutting Board.

How to build the Star Wars End Table

I have SketchUp plans in the works. This is something I hope to make available before the weekend is up.

Step 1: Glue up the 1×6 boards

First up, create a panel with the 1×6 boards. Glue the edges and clamp the boards together. After 15 minutes have passed, use a scraper to remove excess glue from the squeeze out.  Let the glue dry completely before removing the clamps.

Step 2: Create dados

I opted for dado joints for this project because alignment critical.  I felt a dado was the best form of joinery for the project.  I whipped up a little jig for my router to create dados.  The jig was inspired by a Popular Woodworking Magazine article.  You can read about it here.

On a quarter sheet of plywood mark off the center from the short side and long side.  Create a dado along the lines. Repeat this step for the other end of the quarter sheet of plywood.

At the midpoint of the 20” x 22” pieces of plywood, create a dado on each side.

Step 3: Cut circles

With a router and a circle cutting jig, cut out 4 circles.  (Alternatively you can use a jigsaw.)

• 20″ diameter circle with the dados (2)
• 20″ diameter circle from the 1×6 panel (1)
• 19 1/2″ diameter circle (1)

Cut the 19 1/2″ circle into quarters.

All done cutting the circles. 🙌 I finished cutting the other parts of this project too. Tomorrow I’ll assemble it. 🛠 Hopefully everything will fit together. 😅 . #imnervous #notfeelingoptimistic #woodworking #woodwork #woodworker #dowoodworking #circle #circles #woodencircle #plywood #pine #garage #garageshop #sundayfunday

A post shared by Ashley Grenon (@handmadewithashley) on Apr 30, 2017 at 4:51pm PDT

Step 4: Notch out the table “legs”

Find the center of the 20″ x 22″ pieces of plywood and notch out a portion of the board to make a lap joint with the other table leg.

Step 5: Assemble the table base

To assemble the table base:

1. Place 1 circle with dado side up on a flat surface.
2. Attach the legs.
3. Attach the base top.
4. Insert table shelves.

Use wood glue and clamps to secure the joints.

Step 6: Paint the base, stain the top

Paint the base and seal it with your favorite sealer.

Stain the table top.  I used ECOS Paints Woodshield (Pine Needles).

Step 7: Paint the Rebel Symbol

I used my Silhouette to create a Rebel stencil about 16″ in diameter.

I traced an outline of the symbol and painted the symbol red.  Allow the paint to dry before continuing onto the next step.

Step 8: Add glitter

Add glitter to the Rebel symbol.  I used Mod Podge to adhere the glitter the table top. Once the Mod Podge dries, seal the glitter with a coat or two of clear matte spray finish.

 

It’s so shiny 😍 Getting close to finishing up this project! I should have started it a week ago. 😅 This top is the 2×6 I resawed earlier. I didn’t have any issues with it warping. I think that’s probably because that scrap has been sitting my garage for many months. 🤔 . #rebel #starwars #starwarscrafts #starwarscraft #geek #geekcraft #geekywoodworking #woodworking #dowoodworking #woodworker #glitter #red #rebelsymbol #starwarsday #may4th #maythe4thebewithyou #maytheforcebewithyou #diy #handmadewithashley

A post shared by Ashley Grenon (@handmadewithashley) on May 3, 2017 at 10:12pm PDT

Step 9:  Coat the top with resin

Before applying resin, try to remove as much of the loose glitter as possible.  Mix the resin according to the package instructions and apply a coat to the surface of the table top.  Allow for it to completely cure before continuing onto the next step.

Step 10: Attach table top to table base

Secure the table top to the table base.

Step 11: Make it spin!

This step has not been implemented yet, but it is a modification to the project that I plan on making.

Star Wars Inspired End Table

If you build this Star Wars inspired end table, please leave a comment below or tag me on Instagram @handmadewithashley or Twitter @handmadewithash.   I’d love to see your pictures!

Pin it!

I’m linkin up to:

• Kim Six Fix
• Remodelaholic
• Tater Tots and Jello